Front Circuit Breaker Sensor: Installation

1. INSTALL CIRCUIT BREAKER SENSOR NO. 1 
   1. Install the circuit breaker sensor No. 1 with the 2 bolts to the w/ converter inverter assembly.

      Torque: 8.0 N*m (82 kgf*cm, 70 in.*lbf) 

      Fig 1: Locating Circuit Breaker Sensor No. 1 And Bolts

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   2. Connect the connector to the circuit breaker sensor No. 1.
   Fig 2: Locating Circuit Breaker Sensor No. 1 Connector
   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. INSTALL AIR CLEANER CAP W/INLET  (See INSTALLATION )
3. INSTALL ENGINE ROOM SIDE LH COVER NO. 2  (See INSTALLATION )
4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
5. PERFORM INITIALIZATION 

Some systems need initialization when disconnecting the cable from the negative battery terminal. (See INITIALIZATION )