July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Circuit Breaker Sensor: Removal

DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
REMOVE ENGINE ROOM SIDE LH COVER NO. 2 (See REMOVAL )
REMOVE AIR CLEANER CAP W/INLET (See REMOVAL )
REMOVE CIRCUIT BREAKER SENSOR NO. 1
1. Move the outer section to the wire harness side as illustrated, then disconnect the circuit breaker sensor No. 1.
  
  Fig 1: Moving Outer Section To Wire Harness Side
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the 2 bolts and circuit breaker sensor No. 1 from the w/ converter inverter assembly.

Fig 2: Locating Circuit Breaker Sensor No. 1 And Bolts

G05201855

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002