Front Speed Sensor: Removal

WARNING: This page is about a different car, the 2006 Lexus RX 400h. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE FRONT WHEEL
REMOVE FRONT FENDER SPLASH SHIELD SUBASSEMBLY
1. Remove the bolts, screws, clips and front fender splash shield sub-assembly.
REMOVE FRONT SPEED SENSOR
1. Disconnect the front speed sensor connector.
2. Remove the 2 bolts from the body and the shock absorber assembly.
3. Remove the clamp from the steering knuckle.
  
  Fig 1: Removing Clamp From Steering Knuckle
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
4. Remove the bolt and the front speed sensor.
  
  Fig 2: Removing Bolt And Front Speed Sensor
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  NOTE:
  - Prevent foreign matter from attaching to the sensor tip.
  - Clean the installation hole and the surface for the speed sensor every time the speed sensor is removed.