LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Seat) >> Front Seat Assembly >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Front Seat Assembly: Installation

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. INSTALL FRONT SEAT ASSEMBLY 
    1. Place the seat in the cabin.
      NOTE: Be careful not to damage the vehicle body.
    2. Connect the connector under the seat.
    3. Install the seat with the 4 bolts.

      Torque: 37 N*m (377 kgf*cm, 27 ft.*lbf) 

    4. Install the 4 seat track covers.
  2. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL 
  3. PERFORM INITIALIZATION 
    1. Perform initialization (see INITIALIZATION ).
      NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.
  4. CHECK SRS WARNING LIGHT 
    1. Check the SRS warning light (see DIAGNOSIS SYSTEM ).
scientia non olet · About LEMON Manuals