LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2008 >> SC 430 >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Brake Control) >> Yaw Rate And Acceleration Sensor >> Removal
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Yaw Rate And Acceleration Sensor: Removal

WARNING: This page is about a different car, the 2007 Lexus SC 430. However, it is still accessible from the selected car via links, so may be relevant.
  1. REMOVE DOOR SCUFF PLATE ASSEMBLY LH (See  DISASSEMBLY  ) 
  2. REMOVE FRONT DOOR OPENING TRIM COVER LH (See  DISASSEMBLY  ) 
  3. REMOVE NO. 1 INSTRUMENT PANEL SAFETY PAD SUB-ASSEMBLY (See  REMOVAL  ) 
  4. REMOVE REAR CONSOLE UPPER PANEL GARNISH (See  REMOVAL  ) 
  5. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY (See  REMOVAL  ) 
  6. REMOVE AIR CONDITIONER CONTROL ASSEMBLY (See  REMOVAL  ) 
  7. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY LOWER CENTER 
  8. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (See  REMOVAL  ) 
  9. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY (See  REMOVAL  ) 
  10. REMOVE CONSOLE BOX CARPET 
  11. REMOVE NO. 3 BOX PANEL (See  REMOVAL  ) 
  12. REMOVE CONSOLE BOX ASSEMBLY (See  REMOVAL  ) 
  13. REMOVE YAW RATE AND ACCELERATION SENSOR 
    1. Disconnect the sensor connector.
    2. Remove the 2 bolts and sensor.
      Fig 1: Locating Bolts And Sensor
      G05290718Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002