Reverse Shift-linked Function of Power Mirrors does not Operate: Procedure
- CHECK INTEGRATION CONTROL AND PANEL ASSEMBLY FUNCTION (MIRROR MASTER SWITCH FUNCTION)
- Check that the outer rear view mirror assembly LH and RH can be moved using the mirror master switch of the integration control and panel assembly.
OK
Outer rear view mirror assembly LH and RH can be moved using mirror master switch of integration control and panel assembly.
NG → GO TO PROBLEM SYMPTOMS TABLE
OK: Go to next step
- Check that the outer rear view mirror assembly LH and RH can be moved using the mirror master switch of the integration control and panel assembly.
- CHECK OPERATION OF SHIFT INDICATOR
- Check that the shift indicator of the combination meter operates normally.
OK
Shift indicator of combination meter operates normally.
NG → GO TO COMBINATION METER (SERVICE INFORMATION)
OK: Go to next step
- Check that the shift indicator of the combination meter operates normally.
- CHECK FRONT MULTIPLEX NETWORK DOOR ECU
- Check if the malfunction disappears when a normally functioning front multiplex network door ECU.
Result
Result Proceed to Outer rear view mirror LH does not operate normally A Outer rear view mirror RH does not operate normally B Outer rear view mirror LH operates normally C Outer rear view mirror RH operates normally D
D → REPLACE FRONT MULTIPLEX NETWORK DOOR ECU RH
C → REPLACE FRONT MULTIPLEX NETWORK DOOR ECU LH
B → REPLACE OUTER MIRROR ACTUATOR ASSEMBLY RH
A → REPLACE OUTER MIRROR ACTUATOR ASSEMBLY LH
- Check if the malfunction disappears when a normally functioning front multiplex network door ECU.