DTC P0607: Control Module Performance: Procedure
- CHECK WHETHER DTC OUTPUT RECURS (IN ADDITION TO DTC P0607)
- Connect the Techstream to the DLC3.
- Turn the power switch on (IG).
- Turn the Techstream on.
- Clear the DTC. Refer toDTC CHECK / CLEAR .
- Turn the power switch off.
- Disconnect the battery negative terminal and wait for 1 minute.
- Connect the battery negative terminal.
- Turn the power switch on (IG).
- Enter the following menus: Powertrain / Engine and ECT / Trouble Codes.
- Read the DTCs.
Result
Display (DTC output) Proceed to P0607 A No output DTC B
B → See step 2
A → See step 3
- CHECK FOR INTERMITTENT PROBLEMS. Refer to CHECK FOR INTERMITTENT PROBLEMS
- REPLACE ECM. Refer to REMOVAL