Shift Paddle Switch: Installation: Installation

INSTALL SHIFT PADDLE SWITCH

Install the 2 shift paddle switches and 2 brackets with the 4 screws.

Fig 1: Identifying Shift Paddle Switch Brackets And Screws

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

TEXT IN ILLUSTRATION

*1	Shift Paddle Switch
*2	Bracket

Torque: 1.7 N*m (17 kgf*cm, 15 in.*lbf)

NOTE:

Make sure that the brackets are securely installed.

Connect the 2 switch wire connectors to the shift paddle switches.

Fig 2: Identifying Steering Wheel Assembly Switch Wire
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
TEXT IN ILLUSTRATION

*1 Switch Wire
Install the connector to the steering wheel assembly.

Fig 3: Locating Shift Paddle Switch Clamp
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Install the clamp to the steering wheel assembly.

ALIGN FRONT WHEELS FACING STRAIGHT AHEAD
ADJUST SPIRAL CABLE . Refer to INSTALLATION - Step 6
INSTALL STEERING WHEEL ASSEMBLY . Refer to INSTALLATION - Step 10
INSTALL STEERING PAD . Refer to INSTALLATION - Step 1
INSTALL LOWER NO. 3 STEERING WHEEL COVER . Refer to INSTALLATION - Step 2
INSTALL LOWER NO. 2 STEERING WHEEL COVER . Refer to INSTALLATION - Step 3
INSPECT STEERING WHEEL CENTER POINT
CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
NOTE:
- Make sure that the cable has been disconnected from the battery terminal for at least 2 seconds before reconnecting the cable.
- Connect the cable to the negative (-) battery terminal with the front wheels facing straight ahead.
INSPECT STEERING PAD . Refer to INSTALLATION - Step 5
INSPECT SRS WARNING LIGHT
1. Inspect the SRS warning light. Refer to DIAGNOSIS SYSTEM .