Removal

3UZ-FE ENGINE CONTROL SYSTEM: VVT SENSOR: REMOVAL

1. DISCHARGE FUEL SYSTEM PRESSURE

2. DRAIN ENGINE COOLANT Service and Repair

3. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:
Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

4. REMOVE V-BANK COVER Removal

5. REMOVE NO. 1 AIR CLEANER INLET Removal

6. REMOVE INTAKE AIR CONNECTOR PIPE Removal

7. REMOVE INTAKE MANIFOLD

(a) Remove the intake manifold Removal.

8. REMOVE VVT SENSOR





(a) Remove the 2 bolts and 2 sensors.