Rear Speed Sensor: Installation: Installation

INSTALL REAR SPEED SENSOR RH
1. Install the sensor with the bolt.
  
  Fig 1: Identifying Rear Speed Sensor And Fastener
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
2. Install the No. 2 clamp with the nut.
  Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf)
3. Connect the sensor connector.
INSTALL REAR SPEED SENSOR LH
1. Install the sensor with the bolt.
  
  Fig 2: Identifying Rear Speed Sensor And Fastener
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  
  Torque: 8.5 N*m (87 kgf*cm, 75 in.*lbf)
2. Install the No. 1 clamp with the bolt.
  Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf)
3. Install the No. 2 and No. 3 clamps with the bolt and nut.
  Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf)
4. Connect the height control sensor connector, and then install the resin clamp and clamp bolt.
  Torque: 6.0 N*m (61 kgf*cm, 53 in.*lbf)
5. Connect the sensor and height control sensor connector.
INSTALL REAR SEATBACK ASSEMBLY . Refer to INSTALLATION - Step 1
INSTALL REAR SEAT HEADREST ASSEMBLY . Refer to INSTALLATION - Step 2
INSTALL REAR SEAT HEADREST PLATE . Refer to INSTALLATION - Step 3
INSTALL WIND DEFLECTOR BOARD ASSEMBLY . Refer to INSTALLATION - Step 4
INSTALL REAR SEAT HEADREST PLATE COVER . Refer to INSTALLATION - Step 5
INSTALL REAR SEAT CUSHION ASSEMBLY . Refer to INSTALLATION - Step 6
INSTALL REAR WHEEL
1. Install the wheel with the 5 nuts.
  Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf)
2. Install the ornament with the 10 bolts.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
CHECK ABS SPEED SENSOR SIGNAL
1. Check the speed sensor signal. Refer to TEST MODE PROCEDURE .