Typical Enabling Conditions
ALL:
| Monitor runs whenever following DTCs are not present | None |
ECT SENSOR COLD START MONITOR:
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| ECT sensor circuit fail (P0115, P0117, P0118 and P0125) | Not detected |
| IAT sensor circuit fail (P0112 and P0113) | Not detected |
| Thermostat fail (P0128) | Not detected |
| Soak time | 0 second or more |
| Accumulated MAF | Manual transmission models: 1948 g or more Automatic transmission models: 1908 g or more |
| Fuel cut | OFF |
| Difference between ECT at engine start and IAT | Less than 40°C (72°F) |
ECT SENSOR SOAK MONITOR:
| Battery voltage | 10.5 V or more |
| Engine | Running |
| ECT sensor circuit fail (P0115, P0117, P0118 and P0125) | Not detected |
| IAT sensor circuit fail (P0112 and P0113) | Not detected |
| Thermostat fail (P0128) | Not detected |
| Soak timer circuit fail (P2610) | Not detected |
| Soak time | 5 hours or more |
| ECT at engine start | 60°C (140°F) or more |
| Accumulated MAF | Manual transmission models: 3926 g or more Automatic transmission models: 4050 g or more |