LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2011 >> IS F >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System (Service Information) >> Engine Coolant Temperature Sensor >> Removal >> Removal
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Engine Coolant Temperature Sensor: Removal: Removal

  1. REMOVE V-BANK COVER SUB-ASSEMBLY  . Refer to REMOVAL - Step 2
  2. REMOVE COOL AIR INTAKE DUCT SEAL  . Refer to REMOVAL - Step 3
  3. REMOVE AIR CLEANER CAP SUB-ASSEMBLY  See step  4
  4. REMOVE ENGINE UNDER COVER 
  5. DRAIN ENGINE COOLANT  . Refer to REPLACEMENT - Step 3
  6. REMOVE E.F.I. ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the E.F.I. engine coolant temperature sensor connector.
      Fig 1: Identifying E FI Engine Coolant Temperature Sensor Connector
      GTY148775Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the E.F.I. engine coolant temperature sensor.
    3. Remove the gasket from the engine coolant temperature sensor.
scientia non olet · About LEMON Manuals