Problem Symptoms Table
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Inspect the fuses and relays related to this system before inspecting the suspected areas below.
PROBLEM SYMPTOMS TABLE
| Symptom | Suspected Area | See |
|---|---|---|
| Clock is not displayed | Proceed to "Clock Power Source Circuit" | Refer to Clock Power Source Circuit |
| Replace clock assembly | Refer to REMOVAL | |
| Clocks time is very incorrect | Proceed to "AVC-LAN circuit"*1 | Refer to AVC-LAN Circuit |
| Proceed to "AVC-LAN circuit"*2 | Refer to AVC-LAN Circuit | |
| Proceed to "AVC-LAN circuit"*3 | Refer to AVC-LAN Circuit | |
| Replace clock assembly | Refer to REMOVAL | |
| Replace display and navigation module display*1 | Refer to REMOVAL | |
| Replace display and navigation module display*2 | Refer to REMOVAL | |
| Replace display and navigation module display*3 | Refer to REMOVAL | |
| Clocks nighttime illumination does not operate | Check harness or connector (illumination) | Refer to TERMINALS OF ECU |
| Proceed to "AVC-LAN circuit"*1 | Refer to AVC-LAN Circuit | |
| Proceed to "AVC-LAN circuit"*2 | Refer to AVC-LAN Circuit | |
| Proceed to "AVC-LAN circuit"*3 | Refer to AVC-LAN Circuit | |
| Replace clock assembly | Refer to REMOVAL | |
| Replace display and navigation module display*1 | Refer to REMOVAL | |
| Replace display and navigation module display*2 | Refer to REMOVAL | |
| Replace display and navigation module display*3 | Refer to REMOVAL | |
| *1: w/ Navigation System (for DVD) *2: w/ Navigation System (for HDD) *3: w/o Navigation System |
||