Problem Symptoms Table
HINT:
- Use the table below to help determine the cause of problem symptoms. If multiple suspected areas are listed, the potential causes of the symptoms are listed in order of probability in the "Suspected Area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.
- Problem symptoms may occur if the electric power control system functions malfunction. Follow the HOW TO PROCEED WITH TROUBLESHOOTING procedures.
POWER SHOULDER BELT ANCHORAGE SYSTEM
| Symptom | Suspected Area | See |
|---|---|---|
| Driver side seat belt anchor does not operate manually | Shoulder belt anchorage switch LH | Refer to INSPECTION |
| Front door ECU LH | Refer to TERMINALS OF ECU | |
| Rear junction block ECU | Refer to TERMINALS OF ECU | |
| Shoulder belt anchor motor LH | Refer to INSPECTION | |
| Wire harness | - | |
| Front passenger side seat belt anchor does not operate manually | Shoulder belt anchorage switch RH | Refer to INSPECTION |
| Front door ECU RH | Refer to TERMINALS OF ECU | |
| Rear junction block ECU | Refer to TERMINALS OF ECU | |
| Shoulder belt anchor motor RH | Refer to INSPECTION | |
| Wire harness | - | |
| Seat belt anchor position is not memorized or does not move to memorized position | Front power seat switch LH | - |
| Front power seat switch RH | - | |
| Front door ECU LH | Refer to TERMINALS OF ECU | |
| Front door ECU RH | Refer to TERMINALS OF ECU | |
| Seat memory switch LH | Refer to INSPECTION | |
| Seat memory switch RH | Refer to INSPECTION | |
| Rear junction block ECU | Refer to TERMINALS OF ECU | |
| Wire harness | - |