Power Door Lock Control System: Precaution: Precaution

NOTE:

When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.

System Name	See Procedure
Parking Assist Monitor System	Refer to INITIALIZATION
Side Monitor System (w/ Parking Assist Monitor System)
Back Door Closer System
Power Back Door System

PRECAUTIONS WHEN USING TECHSTREAM
1. When using the Techstream to troubleshoot the power door lock control system:
  Connect the Techstream to the DLC3 while the engine switch is off, and turn a door courtesy light switch on and off at 1.5-second intervals until communication between the Techstream and vehicle begins.