Typical Enabling Conditions
ALL
| Monitor runs whenever following DTCs are not present | None |
COLD START MONITOR
| Battery voltage | 10.5 V or more |
| Time after engine start | 1 second or more |
| ECT at engine start | Less than 60°C (140°F) |
| ECT sensor circuit fail (P0115, P0117, P0118 and P0125) | Not detected |
| IAT sensor circuit fail (P0112 and P0113) | Not detected |
| Thermostat fail (P0128) | Not detected |
| Soak time | 0 second or more |
| Accumulated MAF | 5656 g or more |
| Fuel cut | Off |
| Difference between ECT at engine start and IAT | Less than 40°C (72°F) |
SOAK MONITOR
| Battery voltage | 10.5 V or more |
| Engine | Running |
| ECT sensor circuit fail (P0115, P0117, P0118 and P0125) | Not detected |
| IAT sensor circuit fail (P0112 and P0113) | Not detected |
| Thermostat fail (P0128) | Not detected |
| Soak timer circuit fail (P2610) | Not detected |
| Soak time | 5 hours or more |
| Either of the following conditions is met | 1 or 2 |
| 1. ECT | 60°C (140°F) or more |
| 2. Accumulated MAF | 11312 g or more |