Precaution [03/2012 - 07/2012]
- NOTICE FOR INITIALIZATION: NOTE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected.
System Name See Procedure Parking Assist Monitor System Refer to INITIALIZATION [03/2012 - 07/2012] Back Door Closer System Power Back Door System - PRECAUTIONS WHEN WORKING ON STEERING LOCK SYSTEM
- After replacing the steering lock ECU (steering lock actuator assembly), perform the key ID code registration.
- After replacing the steering lock ECU (steering lock actuator assembly), confirm the lock/unlock operation of the steering lock.OPERATION CONFIRMATION
Steering Lock Condition Operation Condition Lock With the engine switch off, open and close any door. Unlock Turn the engine switch from off to on (IG) or on (ACC).