LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2015 >> GS 350 Base, AWD >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Service Information >> Engine Coolant Temperature Sensor >> Removal [09/2014 - 10/2015] >> Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal [09/2014 - 10/2015]: Procedure

  1. REMOVE FUEL PRESSURE SENSOR 

    (Refer to REMOVAL [09/2014 - 10/2015] )

  2. DISCONNECT WATER BY-PASS HOSE 
    1. Disconnect the water by-pass hose from the rear water by-pass joint.
      GTY404326Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE ENGINE COOLANT TEMPERATURE SENSOR 
    1. Disconnect the engine coolant temperature sensor connector.
    2. Remove the engine coolant temperature sensor and gasket.
      GTY396321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals