Installation [10/2015 - ]: Procedure

WARNING: This page is about a different car, the 2019 Lexus GS 300, 2018 Lexus GS 300, 2017 Lexus GS 200t, and 2016 Lexus GS 200t. However, it is still accessible from the selected car via links, so may be relevant.

INSTALL KNOCK SENSOR

HINT:

Perform "Inspection After Repairs" after replacing the knock sensor.

Refer to INITIALIZATION [10/2015 - 09/2018] or INITIALIZATION [09/2018 - ]

Install the knock sensor with the bolt so that the knock sensor is angled as shown in the illustration.

Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)

NOTE:

Replace with a new part if it is dropped or if it receives a strong impact.

*a	Upper Side of the Engine
*b	Right Side of the Vehicle
*c	10°

Connect the knock sensor connector.

INSTALL INTAKE MANIFOLD
Refer to INSTALLATION [10/2015 - ]