Inspection [10/2015 - ]: Procedure
- INSPECT SKID CONTROL BUZZER ASSEMBLY (PRE-COLLISION SYSTEM WARNING BUZZER)
- Apply battery voltage and check the operation of the skid control buzzer assembly (pre-collision system warning buzzer) according to the table below.
*a Component without harness connected
(Skid Control Buzzer Assembly (Pre-collision System Warning Buzzer))OK
Measurement Condition Specified Condition Battery positive (+) → Terminal 2(IG1)
Battery negative (-) → Terminal 1(BZ)Skid control buzzer assembly (pre-collision system warning buzzer) sounds If the result is not as specified, replace the skid control buzzer assembly (pre-collision system warning buzzer).
- Apply battery voltage and check the operation of the skid control buzzer assembly (pre-collision system warning buzzer) according to the table below.