Removal [09/2014 - ]: Procedure

Refer to PROCEDURE - Step 3

(See article. Refer to PROCEDURE - Step 16 )

1. Disconnect the connector.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   TEXT IN ILLUSTRATION
   
   

   *A

   for LH Side

   *B

   for RH Side

2. Remove the 2 bolts and 2 harness clamps.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

3. Remove the bolt and rear speed sensor LH from the rear axle.
   NOTE:

   Prevent foreign matter from attaching to the sensor tip.

4. Remove the 2 nuts and 2 harness clamps.

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

5. Disconnect the grommet of the rear speed sensor LH from the hole of the wheel house.
6. Remove the rear speed sensor LH.
   NOTE:

   Prevent foreign matter from attaching to the sensor tip.