LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lexus >> 2020 >> NX 300h Base >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Collision/Avoidance >> Front Camera System - Diagnostic Codes >> Front Camera System >> DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed; DTC U030057: Internal Control Module Software Incompatibility Invalid/Incompatible Software Component [05/2019 - ] >> Description
April 5, 2026: LEMON Manuals is launched! Read the announcement.

DTC U0300-51: Internal Control Module Software Incompatibility Not Programmed; DTC U030057: Internal Control Module Software Incompatibility Invalid/Incompatible Software Component [05/2019 - ]: Description

DTC No. Detection Item DTC Detection Condition Trouble Area
U030051 Internal Control Module Software Incompatibility Not Programmed Once 3 seconds elapse after turning the power switch on (IG), the forward recognition camera is unable to determine the vehicle information (Conv/HV) based on the vehicle information (Conv/HV) sent from the ECM for approximately 3 seconds or more
  • Hybrid control system
  • Forward recognition camera
U030057 Internal Control Module Software Incompatibility Invalid/Incompatible Software Component Once 3 seconds elapse after turning the power switch on (IG), the vehicle information (Conv/HV) sent from the hybrid vehicle control ECU does not match the vehicle information stored by the forward recognition camera for approximately 1 second or more
  • Hybrid control system
  • Forward recognition camera