Installation [10/2023 - ]: Procedure

1. for LH Side:
   1. Connect the connector.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   2. Install the acceleration sensor with the nut.

      Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf) 

      NOTE:

      • Avoid any impact to the acceleration sensor.
      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.
   3. Return the floor carpet to its original position.
2. for RH Side:
   1. Connect the connector.

      Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   2. Install the acceleration sensor with the nut.

      Torque: 7.5 N.m (76 kgf/cm, 66 in.lbf) 

      NOTE:

      • Avoid any impact to the acceleration sensor.
      • Do not drop the acceleration sensor. If it is dropped, replace it with a new one.
   3. Return the floor carpet to its original position.

Refer to PROCEDURE - Step 33

Refer to PROCEDURE - Step 37

Refer to PROCEDURE - Step 36

Refer to PROCEDURE - Step 40

Refer to INSTALLATION [10/2023 - ]

Refer to VEHICLE IDENTIFICATION INFORMATION REGISTRATION [10/2023 - ]

Refer to WORK PROCEDURE [10/2022 - ]

HINT: 

When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.

Refer to AUTOMATIC LEARNING CHART [10/2023 - ]