Removal [10/2017 - 09/2018]: Procedure

PRECAUTION
NOTE:
After turning the power switch off, waiting time may be required before disconnecting the negative auxiliary battery terminal. Therefore, make sure to read the disconnecting the negative auxiliary battery terminal notice before proceeding with work.

Refer to PRECAUTION [10/2017 - 09/2019]
DISCONNECT CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
Refer to REMOVAL [10/2017 - 09/2018]

NOTE:
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.

Refer to INITIALIZATION [10/2017 - 09/2018]
REMOVE FRONT DOOR SCUFF PLATE LH
Refer to PROCEDURE - Step 6
REMOVE FRONT DOOR SCUFF PLATE RH
Refer to PROCEDURE - Step 10
REMOVE COWL SIDE TRIM BOARD LH
Refer to PROCEDURE - Step 9
REMOVE COWL SIDE TRIM BOARD RH
Refer to PROCEDURE - Step 13

REMOVE ACCELERATION SENSOR ASSEMBLY

for LH Side:

Remove the nut and acceleration sensor.

NOTE:

Avoid any impact to the acceleration sensor.
Do not drop the acceleration sensor. If it is dropped, replace it with a new one.

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

for RH Side:

Remove the nut and acceleration sensor.

NOTE:

Avoid any impact to the acceleration sensor.
Do not drop the acceleration sensor. If it is dropped, replace it with a new one.