Installation [10/2018 - ]: Procedure

HINT: 

Perform "Inspection After Repair" after replacing a spark plug.

Refer to INITIALIZATION [10/2018 - 08/2021] , or refer to INITIALIZATION [08/2021 - ]

1. Install the 4 spark plugs to the cylinder head sub-assembly.

   Torque: 20 N.m (204 kgf/cm, 15 ft.lbf) 

   NOTE:

   If a spark plug has been struck or dropped, replace it.

   HINT: 

   Install the same parts to their original positions.

Refer to PROCEDURE - Step 2

Refer to PROCEDURE - Step 48 [10/2018 - 07/2022] , or refer to PROCEDURE - Step 48 [07/2022 - ]

1. Perform "Inspection After Repair" after replacing an ignition coil assembly or spark plug.

   Refer to INITIALIZATION [10/2018 - 08/2021] , or refer to INITIALIZATION [08/2021 - ]