Typical Enabling Conditions
C12FA
| Monitor runs whenever the following DTCs are not stored | None |
| Brake system voltage 1 | Higher than 7 V |
C12FB
| Monitor runs whenever the following DTCs are not stored | C0597 (Case 1): Skid control ECU EEPROM malfunction C0597 (Case 2): Skid control ECU lost communication C0597 (Case 3): Skid control ECU CPU malfunction C0597 (Case 4): Skid control ECU IC malfunction C0597 (Case 5): Skid control ECU signal CPU communication failure |
| Both of the following conditions are met | - |
| Main relay 1 | Off |
| C0597 (Case 1, 2 and 3) | Not detected |
C130C
| Monitor runs whenever the following DTCs are not stored | None |
| Brake system voltage 2 | Higher than 7 V |
C130D
| Monitor runs whenever the following DTCs are not stored | C0597 (Case 1): Skid control ECU EEPROM malfunction C0597 (Case 2): Skid control ECU lost communication C0597 (Case 3): Skid control ECU CPU malfunction C0597 (Case 4): Skid control ECU IC malfunction C0597 (Case 5): Skid control ECU signal CPU communication failure |
| Both of the following conditions are met | - |
| Main relay 2 | Off |
| C0597 (Case 1, 2 and 3) | Not detected |