Throttle Position Sensor
IDLE SPEEDThe idle speed is computer controlled and a scan tool is required for adjustment. Refer to ADJUSTMENT PROCEDURES.
TORQUE VALUES
Air Cleaner Assembly Retaining Screw 36 lb. in. (4 N-m)
Air Cleaner Outlet Tube Clamp 12-22 lb. in. (1.4-2.5 N-m)
Accelerator Cable Mounting Bracket Bolts 10-15 lb. ft. (14-20 N-m)
Air Cleaner Cover Assembly Screws 20-30 lb. in. (2.5-3.5 N-m)
Accelerator Pedal Attachment Nuts 10-15 lb. ft. (14-20 N-m)
Air Bypass Valve to Throttle Body 87 lb. in. (10 N-m)
Air Supply Tube Clamps 19 lb. in. (2.2 N-m)
Alternator Brace to Alternator 37 lb. ft. (51 N-m)
Alternator Brace to Water Pump and Upper Manifold 19 lb. ft. (25 N-m)
EGR Valve to Upper Manifold 19 lb. ft. (25 N-m)
EGR Tube to EGR Valve and Exhaust Manifold 30 lb. ft. (41 N-m)
Fuel Pressure Regulator to Fuel Rail Assembly 34 lb. in. (4.0 N-m)
Fuel Rail Assembly to Intake Manifold 87 lb. in. (10 N-m)
Linkage Assembly to Transaxle Bolts 5-8 lb. ft. (8-12 N-m)
Lower Intake Manifold to Head 23 lb. ft. (32 N-m)
Manifold Support Bracket 19 lb. ft. (25 N-m)
Throttle Body to Upper Intake Manifold 19 lb. ft. (25 N-m)
Throttle Cable Bracket to Manifold 13 lb. ft. (17 N-m)
Throttle Position Sensor to Throttle Body 19 lb. in. (1.5 N-m)
Upper Intake Manifold to Lower Intake Manifold Bolts 24 lb. ft. (32 N-m)