Memory Seat Programming
- To program position No. 1, move driver's seat to desired position using manual controls. Depress the set button. Within five seconds (before the LED goes out) depress button No. 1. See Fig 1
.
- To program position No. 2, repeat the previous procedure using button 2. No. To program position No. 3, repeat the previous procedure but depress buttons No. 1 and 2 simultaneously.
- To recall position No. 1, depress button No. 1. To recall position No. 2, depress button No. 2. To recall position No. 3, depress buttons No. 1 and 2 simultaneously.
Courtesy of FORD MOTOR CO.