LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 1993 >> Continental Executive, AXODE >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Throttle Position (TP) Sensor >> Removal & Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Removal & Installation

  1. Remove distributor cap, if necessary. Disconnect TP sensor from wiring harness. Mark throttle body and TP sensor for reassembly reference. Remove mounting screws and TP sensor. To install, slide rotary tangs of TP sensor into position over throttle shaft blade with wires pointing down. Rotate TP sensor clockwise to installed position.
  2. Failure to install TP sensor in this manner may result in excessive idle speeds. Align marks on throttle body and TP sensor. Secure TP sensor to throttle assembly with retaining screws. Reconnect wiring.
scientia non olet · About LEMON Manuals