Cruise Control Module: Service and Repair

Speed Control Amplifier









Removal

1. Disconnect two electrical connectors at speed control amplifier.

2. Remove two screws retaining speed control amplifier and bracket assembly to instrument panel.

3. Remove speed control amplifier and bracket assembly from instrument panel.

4. Remove two bolts and nuts retaining speed control amplifier assembly to mounting bracket.


Installation

1. Install two bolts and nuts which retain amplifier assembly to mounting bracket. Tighten to 1.6-2.3 N-m (14-20 lb-in).

2. Install speed control amplifier and bracket assembly to instrument panel with two screws and tighten to 5-7 N-m (44-62 lb-in).

3. Connect two electrical connectors to speed control amplifier.