Seat Control Switch
Remove seat control switch and disconnect harness connector. Measure resistance between seat control switch terminals with switch in appropriate position. See the SEAT CONTROL SWITCH RESISTANCE table. See Fig 1 . If resistance is not as specified, replace seat control switch.
SEAT CONTROL SWITCH RESISTANCE
| Switch Position | Terminals No. | Resistance: Ohms | ||
|---|---|---|---|---|
| Neutral (1) | 4 & 8 | Greater Than 5 | ||
| Rearward | 4 & 7; 6 & 8 | Less Than 5 | ||
| Forward | 4 & 6; 7 & 8 | Less Than 5 | ||
| Front Down | 1 & 4; 5 & 8 | Less Than 5 | ||
| Front Up | 1 & 8; 4 & 5 | Less Than 5 | ||
| Rear Down | 2 & 8; 3 & 4 | Less Than 5 | ||
| Rear Up | 2 & 4; 3 & 8 | Less Than 5 | ||
| Entire Seat Up | 2, 4 & 5; 1, 3 & 8 | Less Than 5 | ||
| Entire Seat Down | 1, 3 & 4; 2, 5 & 8 | Less Than 5 | ||
|
||||