Mirror Control Switch
Using an ohmmeter, check for continuity between mirror control switch terminals in positions as specified. See POWER MIRROR SWITCH CONTINUITY TEST table. See Figure . Replace switch if continuity is not as specified.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position | Continuity Between Terminals No. | |
|---|---|---|
| Driver's Mirror | ||
| Up | 3 & 8; 4 & 7 | |
| Down | 3 & 4; 7 & 8 | |
| Left | 2 & 7; 3 & 4 | |
| Right | 2 & 3; 4 & 7 | |
| Passenger's Mirror | ||
| Up | 3 & 9; 4 & 7 | |
| Down | 3 & 4; 7 & 9 | |
| Left | 1 & 7; 3 & 4 | |
| Right | 1 & 3; 4 & 7 | |