Pinpoint Test Pc: Data Link Diagnostics Network Test

WARNING: This page is about a different car, the 2005 Lincoln LS. However, it is still accessible from the selected car via links, so may be relevant.

PC1 RUN THE DATA LINK DIAGNOSTICS NETWORK TEST
- Carry out the diagnostic tool data link test.
- Is system passed obtained?
- Yes : Test passed. RETURN to the SYMPTOM CHART of the article for the module in question.
- No : If no response from the diagnostic tool, GO to PINPOINT TEST T .
  If ISO, CAN, UBP, or SCP = SOME ECUS NO RESP/NOT EQUIP, REFER to the SYMPTOM CHART .
  
  If ISO = ALL ECUS NO RESP/NOT EQUIP, GO to PINPOINT TEST P .
  
  If SCP = ALL ECUS NO RESP/NOT EQUIP, GO to PINPOINT TEST O .
  
  If the module in question is NO RESPONSE/NOT EQUIPPED, REFER to the GO to SYMPTOM CHART .
  
  If CAN = ALL ECUS NO RESP/NOT EQUIP, GO to PINPOINT TEST H .