Test D: Cruise Control Switch Does Not Operate

Turn ignition switch to LOCK position. Disconnect speed control servo harness connector C157. Measure resistance between terminals No. 5 (Light Blue/Black wire) and No. 6 (Dark Green/Orange wire) at speed control servo harness connector C157 while pressing appropriate speed control switch assembly switch and rotating steering wheel from lock to lock. See SPEED CONTROL SWITCH RESISTANCE VALUES  table. See Figure . If all resistance values are as specified, replace speed control servo. See SPEED CONTROL SERVO  under REMOVAL & INSTALLATION. If any resistance value is not as specified, replace speed control switch. See SPEED CONTROL SWITCH ASSEMBLY  under REMOVAL & INSTALLATION.