Removal & Installation: Notes
CAUTION:
On models equipped with side air bags, Air Bag Simulators (Restraint Diagnostic Tool 105-R0012) MUST be connected to all air bag floor connector. After diagnosing/repairing, restraint system diagnostic tool must be removed prior to operating vehicle.
WARNING:
On models equipped with side air bags, system must be deactivated. To deactivate air bag system, disconnect negative battery cable and wait one minute.
CAUTION:
When battery is disconnected, vehicle computer and memory systems may lose memory data. Driveability problems may exist until computer systems have completed a relearn cycle. See
COMPUTER RELEARN PROCEDURES article in GENERAL INFORMATION before disconnecting battery.