Adjustable Pedals Memory Positions
WARNING: This page is about a different car, the 2002 Lincoln Navigator and 2002 Ford Expedition. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
When programming adjustable pedals memory positions, the driver power seat and power outside rear view mirrors will also be programmed.
Move pedals to desired position using adjustable pedals switch. Press SET on memory switch, located on driver door. The SET light will turn on. Before the light turns off (about 5 seconds), select desired memory location 1, 2, or 3. To select memory location 3, press 1 and 2 at the same time. If no location is chosen before the light turns off, the procedure must be repeated. If the adjustable pedals switch, driver power seat switch, or power mirror switch is operated while SET light is on, the procedure will cancelled and must be repeated.