Center Support: Disassembly

WARNING: This page is about a different car, the 2003 Lincoln Navigator. However, it is still accessible from the selected car via links, so may be relevant.

Remove and discard the direct clutch seal rings.

Fig 1: Removing And Discarding Direct Clutch Seal Rings
Courtesy of FORD MOTOR CO.
Inspect the following for contamination or damage. Clean or install as necessary.
1. Inspect the ball bearing.
2. Inspect the feedbolt threads.
3. Remove and inspect the No. 6 center support thrust washer.
4. Inspect the inner hub diameter.
5. Inspect the outer hub diameter.
6. Inspect the seal ring grooves.
  
  Fig 2: Inspecting Center Support Components
  Courtesy of FORD MOTOR CO.