LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2002 >> LS 3.9 A >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Disassembly & Assembly Of Subassemblies >> Reverse Servo Assembly >> Assembly
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Reverse Servo Assembly: Assembly

    NOTE: Try not to roll the seal onto the housing when installing the seal or damage to the seal could occur.
    Fig 1: Installing Reverse Servo Piston Seal
    G01673981Courtesy of FORD MOTOR CO.
  1. Lubricate and install a new reverse servo piston seal.
  2. Lubricate and install reverse servo piston and seal assembly.
    Fig 2: Installing Reverse Servo Piston & Seal Assembly
    G01673982Courtesy of FORD MOTOR CO.
  3. Install the reverse servo spring.
    Fig 3: Installing Reverse Servo Spring
    G01673983Courtesy of FORD MOTOR CO.
    4. CAUTION: The arrow on the servo plate must be aligned evenly between any two slots on the cover.
    Fig 4: Installing Reverse Servo Plate
    G01673984Courtesy of FORD MOTOR CO.
  4. Install the reverse servo plate.
  5. Install the reverse servo spring and check valve.
    Fig 5: Installing Reverse Servo Spring & Check Valve
    G01673985Courtesy of FORD MOTOR CO.
  6. Install the control valve spring retainer.
    Fig 6: Installing Control Valve Spring Retainer
    G01673986Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals