Front End: Notes
CAUTION:
Do not attempt to adjust front wheel alignment without first making a preliminary inspection of the front end parts and correcting where necessary.
Prior to inspection:
- Fill all fluids to specification.
- Make sure spare tire or wheel and related equipment are properly stored.
- Remove any excessive accumulation of mud, dirt or road deposits from the chassis and underbody.
- Retain all normal loads in the vehicle. Inflate all tires to the pressure specified on the Safety Compliance Certification Label (usually located on the inside driver door pillar).
- Check both front tires and make sure they are the same size, ply rating, and load range.