Pinpoint Test F: The Speed Control Is Inoperative - Flash With Last Switch Pressed, But No Dynamic Pull Occurs At The Throttle
WARNING: This page is about a different car, the 2004 Ford Ranger. However, it is still accessible from the selected car via links, so may be relevant.
- F1 CHECK THE SPEED CONTROL CABLE
- Check the speed control cable for correct attachment at the speed control actuator and throttle body.
- Is the speed control cable attached correctly?
- Yes : GO to F2.
- No : CONNECT the speed control cable. REPEAT the self-test.
- F2 CHECK FOR A STICKING OR BINDING SPEED CONTROL CABLE
- Check the speed control cable from sticking or binding.
- Is the speed control cable OK?
- Yes : INSTALL a new speed control actuator. REFER to SPEED CONTROL ACTUATOR . REPEAT the self-test.
- No : REPAIR or INSTALL a new speed control cable. REFER to SPEED CONTROL CABLE . REPEAT the self-test.