Speed Control DEACTIVATOR Switch: Installation

All Vehicles 

1. Release the plunger lock (if equipped).
   • Turn the lock knob counterclockwise until first click is felt.
     Fig 1: Turning Lock Knob Counterclockwise

     Courtesy of FORD MOTOR CO.
2. Fully depress the brake pedal.
3. Install the deactivator switch.
   1. Position the deactivator switch in the bracket and rotate clockwise 45 degrees.
   2. Connect the electrical connector.
      Fig 2: Connecting Electrical Connector

      Courtesy of FORD MOTOR CO.

   Vehicles Equipped With Locking Tab 

NOTE: There should be an extra click heard when tugging on the brake pedal.
4. Slowly release the brake pedal and tug moderately once the pedal reaches the rest position.