Rolling Code Programming
NOTE:
To train a garage door opener (or other rolling code-equipped devices) with the rolling code feature, follow these instructions after completing the learn mode.
- Locate the learn or smart button on the garage door motor head unit. Exact location and color of the button may vary by product brand. If there is difficulty locating the learn or smart button, refer to the device's owner manual.
- Press and release the learn or smart button on the garage door motor head unit.
- Press and release the programmed Homelink(R) button. Press and release the Homelink(R) button a second time to complete the training process, (some garage door openers may require this procedure to be done a third time to complete the training.)
NOTE:
Follow the previous step, there are 30 seconds in which to proceed.