LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2004 >> LS 3.0 S >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Cylinder Block Distortion >> Inspection Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Inspection Procedure

  1. Use a straight edge and a feeler gauge to inspect the cylinder block for flatness. If the cylinder block is distorted, install a new short block assembly.
    Fig 1: Inspecting Cylinder Block For Flatness Using Straight Edge And Feeler Gauge
    G03200327Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals