Intermediate Clutch Assembly: Disassembly

Fig 1: Exploded View Of Intermediate Clutch Assembly (C Clutch)

Courtesy of FORD MOTOR CO.

Remove the bearing race. Clean and inspect for damage.
- If damage is indicated, a new intermediate clutch assembly will be required.
Fig 2: Removing Bearing Race
Courtesy of FORD MOTOR CO.
Remove the intermediate clutch plate snap ring.

Fig 3: Removing Intermediate Clutch Plate Snap Ring
Courtesy of FORD MOTOR CO.

NOTE: Inspect the intermediate clutch drum/center support, friction plates and steel plates for damage. No new components are installed at this time. If new components are required, a new intermediate clutch/center support assembly is required.

Fig 4: Removing Intermediate Clutch Plates

Courtesy of FORD MOTOR CO.

Remove the intermediate clutch plates, steel and friction. Inspect the steel and friction plates for damage. If damage is indicated, a new intermediate clutch assembly will be required.
- If no damage is indicated, the intermediate clutch can be re-assembled.