Component Testing Procedure
SEAT ADJUST SWITCH, DRIVER SIDE FRONT - WITHOUT MEMORY - COMPONENT TESTING
| Circuit to test | Connect self-powered test light or ohmmeter to terminals | Move switch to these positions | A good switch will indicate |
|---|---|---|---|
| Power and Ground Checks Before Any Other Tests | 7 and 1,2,3,4,5,8,9, 10 | Rest | Closed circuit |
| 11 and 1,2, 3, 4,5, 7, 8, 9, 10 | Rest | Open circuit | |
| Front height circuit | 11 and 1 8 and 7 |
Down | Closed circuit |
| 11 and 8 1 and 7 |
Up | Closed circuit | |
| Rear height circuit | 11 and 4 5 and 7 |
Down | Closed circuit |
| 11 and 5 4 and 7 |
Up | Closed circuit | |
| Forward/rearward circuit | 11 and 10 9 and 7 |
Rearward | Closed circuit |
| 11 and 9 10 and 7 |
Forward | Closed circuit | |
| Backrest circuit | 11 and 3 2 and 7 |
Rearward | Closed circuit |
| 11 and 2 3 and 7 |
Forward | Closed circuit |