Cruise Control Switch: Service and Repair

SPEED CONTROL SWITCH







Removal and Installation

All vehicles
1. Remove the driver air bag module.

Expedition
2. Remove the 2 screws and the speed control switch.
- Disconnect the electrical connector.

Navigator







3. Remove the horn switch.
1 Disconnect the electrical connector.
2 Remove the 4 bolts.







4. Remove the speed control switch.
1 Disconnect the wiring harness locators.
2 Remove the 4 screws.
- To install, tighten to 7 Nm (62 lb-in).

All vehicles
5. To install, reverse the removal procedure.