LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2006 >> Navigator 4WD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System-General Information >> General Procedures >> Connecting Rod Large End Bore
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Connecting Rod Large End Bore

  1. Tighten the bolts to specification, then measure the bore in 2 directions. The difference is the connecting rod bore out-of-round. Verify the out-of-round is within specification.
    • Refer to ENGINE for the procedure.
    • If out of specification, install new components as necessary. Refer to ENGINE for the procedure.
      Fig 1: Measuring Connecting Rod Large End Bore
      G03946845Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals