Driver Door Module (DDM) DTC Chart
NOTE:
Refer to Description and Operation, Intelligent Access (IA) with Push Button Start in
ANTI-THEFT - PASSIVE ANTI-THEFT SYSTEM (PATS)
to review the procedures for achieving the various ignition states (ignition in accessory, ignition on, ignition start, ignition off) on vehicles with this feature.
DRIVER DOOR MODULE (DDM) DTC CHART
| DTC | Description | Action |
|---|---|---|
| B106E | Solid State Driver Disabled Due to Short Circuit | GO to PINPOINT TEST J . |
| B106F | Module Disabled Due to External Fault | GO to PINPOINT TEST J . |
| B1317 | Battery Voltage High | GO to PINPOINT TEST K . |
| B1318 | Battery Voltage Low | GO to PINPOINT TEST L . |
| B1342 | ECU is Faulted | CLEAR the DTCs. REPEAT the self-test. If DTC B1342 is retrieved again, INSTALL a new DDM . REFER to DRIVER DOOR MODULE (DDM) . TEST the system for normal operation. |
| U0140 | Lost Communication With Body Control Module (GEM) | GO to PINPOINT TEST M . |
| All other DTCs | - | REFER to DIAGNOSTIC TROUBLE CODE (DTC) CHART . |