LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Lincoln >> 2011 >> MKS Base, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1896 (Information System And Entertainment System) >> Removal And Installation >> Front Display Interface Module (FDIM) >> Removal and Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal and Installation

WARNING: This page is about a different car, the 2011 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Vehicles without navigation require Programmable Module Installation (PMI) when a new module is being installed. For vehicles with navigation, the Front Display Interface Module (FDIM) is not a stand-alone module.
  1. For vehicles without navigation, upload the FDIM configuration information to the scan tool. For additional information, refer to PMI in MODULE CONFIGURATION SYSTEM Article.
  2. Remove the center instrument panel finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE Article.
    3. NOTE: For vehicles with navigation, make sure not to bend the video cable when removing the FDIM.
  3. Remove the 4 screws and the FDIM.
    • Disconnect the electrical connectors.
  4. To install, reverse the removal procedure.
    • For vehicles without navigation, download the configuration information to the FDIM. For additional information, refer to PMI in MODULE CONFIGURATION SYSTEM Article.
scientia non olet · About LEMON Manuals