Programming the Auto-Unlock Feature Using the Instrument Panel Cluster (IPC) Message Center
NOTE:
The auto-unlock feature can be activated or deactivated independently of the autolock feature.
NOTE:
The auto-unlock feature is also a programmable parameter and can be enabled/disabled with a scan tool. For additional information on programmable parameters, refer to
MODULE CONFIGURATION
.
- Press the SETUP button on the message center switch until AUTOUNLOCK <ON> OFF is displayed.
- Press the RESET button to select ON or OFF. If auto-unlock is enabled, the message center has brackets around the <ON> display. If auto-unlock is disabled, the message center has brackets around the <OFF> display.